NextMoney Dashboard Setup and Configuration

This document provides detailed steps for setting up and configuring the NextMoney mining device. Follow these instructions to ensure your device operates at its optimal capacity while allowing you to customize settings according to your preferences.

Step 1

Upon powering up the NextMoney mining device, the dashboard will be displayed. The device is pre-configured and ready for operation.

Step 2

Currently, the device is not utilizing its full hash rate potential because the current task does not require it. At present, the device is running at approximately 42 megahashes.

Step 3

The device is capable of achieving up to 80 megahashes. To add a mining pool, navigate to the pool settings, press 'Add', and enter the pool URL, which is Straumon-based.

Step 4

Enter the following IP address: 192.168.0.4.

Step 5

Following the IP address, enter a colon and specify the port number, which is 3334. You may choose any name for the miner and set any password of your choice.

Step 6

Apply the changes. If the IP address is correct, the device will begin mining shortly.

Step 7

After removing the previous pool, you will notice the indicators turning green. The devices have Wi-Fi capability, allowing you to view all available networks.

Step 8

Additionally, you have the option to change the miner's password, restart the device, and monitor its health status. This feature provides comprehensive device management capabilities.